Ken Wells
- Total activity 75
- Last activity
- Member since
- Following 0 users
- Followed by 11 users
- Votes 2
- Subscriptions 38
Activity overview
Latest activity by Ken Wells-
Ken Wells created an article,
How to use a PC or USB Mic with FlexRadio 6000 / 8000 / Aurora Radios
It is possible to use a "sound card" microphone input or a USB microphone with your FlexRadio.But there are several special considerations and configurations that must be observed: Using the Windo...
-
Ken Wells created an article,
Troubleshooting CW PTT Hanging with N1MM+
During contesting, using N1MM+ to send macros for CW, some users have experienced the Radio PTT "hanging" after sending a macro.There are several possible causes for this: CAUSE: Sending from the ...
-
Ken Wells created an article,
How to Operate Digital and Voice modes at the Same Time on the Same Frequency
There are occasions where an operator may wish to operate two different modes on the same frequency:For example: Operating SSTTV to send pictures with MMSSTV, and add comments by voice before or af...
-
Ken Wells created an article,
Mitigating DPC's and Hard Page Fault issues and their impact on DAX
Real-time, low-latency audio applications like DAX rely upon consistent, uninterrupted audio bit streams to and from the radio and PC for proper operation.If the DAX RX or TX Streams are interrupte...
-
Ken Wells created an article,
Using the CWX and WinKeyer Prosigns
In early 2025, FlexRadio updated our WinKeyer Emulator and CWX Prosigns to bring them inline with the official WinKeyer specs.Those specifications are found here: https://www.hamcrafters2.com/fil...
-
Ken Wells created an article,
Connecting "Balanced" Microphones to Flex 6000 / 8000 / Aurora Radios
Many FlexRadio users love to use "studio" or "professional" microphones to operate their Flex Radios.These microphones are available from multiple suppliers, such as Audio Technica, Behringer, Elec...
-
Ken Wells created an article,
Why Can't I Transmit on 60 Meters?
The 60 Meter band, in many jurisdictions, has several special requirements for band frequency limits and Transmit Bandwidth limits. If you are getting "NO TX" or "Transmit Inhibit" warnings on 60...
-
Ken Wells created an article,
How to Connect 3rd Party Microphones with Two-Connector MONO (TS) or Three-Connector "Balanced" TRS Plugs to the Maestro C
The Maestro C uses an industry-standard TRRS (CTIA) format "Headset" connector which is compatible with a vast array of easily obtainable "gaming" headsets. However, many operators prefer using a h...
-
Ken Wells created an article,
Resetting the TGXL (Tuner Genius XL)
There are three different types of resets for the TGXL (Tuner Genius XL) Factory Reset Resetting the Touch Panel Display calibration Resetting the ATU Tuning Solution Memories Factory Reset of a ...
-
Ken Wells created an article,
How To Configure MMSSTV (Slow Scan) for the FLEX-6000/8000 Series Radios
This is a quick pictorial description for configuring a single slice/instance of MMSSTV for basic Slow Scan TV operation with the FLEX-6000/8000 Series Radios. This is for use WITHOUT using SliceM...