Ken Wells
- Total activity 71
- Last activity
- Member since
- Following 0 users
- Followed by 11 users
- Votes 2
- Subscriptions 38
Articles
Recent activity by Ken Wells-
Using the CWX and WinKeyer Prosigns
In early 2025, FlexRadio updated our WinKeyer Emulator and CWX Prosigns to bring them inline with the official WinKeyer specs.Those specifications are found here: https://www.hamcrafters2.com/fil...
-
Connecting "Balanced" Microphones to Flex 6000 / 8000 / Aurora Radios
Many FlexRadio users love to use "studio" or "professional" microphones to operate their Flex Radios.These microphones are available from multiple suppliers, such as Audio Technica, Behringer, Elec...
-
Why Can't I Transmit on 60 Meters?
The 60 Meter band, in many jurisdictions, has several special requirements for band frequency limits and Transmit Bandwidth limits. If you are getting "NO TX" or "Transmit Inhibit" warnings on 60...
-
How to Connect 3rd Party Microphones with Two-Connector MONO (TS) or Three-Connector "Balanced" TRS Plugs to the Maestro C
The Maestro C uses an industry-standard TRRS (CTIA) format "Headset" connector which is compatible with a vast array of easily obtainable "gaming" headsets. However, many operators prefer using a h...
-
Resetting the TGXL (Tuner Genius XL)
There are three different types of resets for the TGXL (Tuner Genius XL) Factory Reset Resetting the Touch Panel Display calibration Resetting the ATU Tuning Solution Memories Factory Reset of a ...
-
How To Configure MMSSTV (Slow Scan) for the FLEX-6000/8000 Series Radios
This is a quick pictorial description for configuring a single slice/instance of MMSSTV for basic Slow Scan TV operation with the FLEX-6000/8000 Series Radios. This is for use WITHOUT using SliceM...
-
Configuring MMTTY for the FLEX-6000/8000 Radios
This is a quick pictorial description for configuring a single slice/instance of MMTTY for basic RTTY operation with the FLEX-6000/8000 Series Radios. This is for use WITHOUT using SliceMaster6000...
-
Configuring ICOM exciters with the PGXL, TGXL and Antenna Genius
Author: Ken Wells - NM9PHere is the proper way to configure most recent ICOM radios to interface with the "Genius Products" for seamless operation. INTRODUCTION:This information is for configuring...
-
How to Fix the AMBER Light Staying Lit on the FLEX-6000 Series Power Button.
Background: The AMBER light on the Power Button of FLEX-6000 radios usually indicates that the radio is turned OFF and you have the Optional GPSDO (GPS Disciplined Oscillator) installed and it is p...
-
How to Connect your FHM-3 Microphone to the Maestro C
The Maestro C uses an industry-standard TRRS (CTIA) format "Headset" connector which is compatible with a vast array of easily obtainable "gaming" headsets. However, many operators prefer using a h...