Tim Ellison

If you are using the Heil CC-1-Y mic cable from Heil Sound with your FLEX-5000, you may experience RFI issues due to the way some of these cables are wired. The FLEX-5000's microphone input is ess...

The FlexControl uses a USB connection that emulates a serial or com port on your PC which allows it to communicate with PowerSDR or SmartSDR.  The com port in Windows emulates a 16550 UART (Univers...

The following PDF download describes in detail how to configure a FLEX-5000 + RX2 + VU software defined radio to operate satellites using SATPC32 for Doppler correction tuning. Setting up the FLEX-...

If in the rare event, your Windows PC is crashing, generating the dreaded Blue Screen of Death (BSoD), Windows will try and create a "dump file" that contains diagnostic information about what caus...

Beginning with FLEX Firewire driver version 3.5.0.7171, there is an applet embedded in the FLEX Firewire control panel that can identify all 1394x Firewire adapters or host controllers installed in...

Deferred Procedure Call (DPC) latency refers to the time your PC waits for a hardware device to complete a request for service (data) from the operating system.  If DPC latency is too long, on the ...

The DPI (dots per inch) setting controls the resolution of images on your computer.  Some programs can change this from the default Windows settings without your knowledge and by doing so, can adve...

The CPU utilization data shown on the PowerSDR console is a result of a .NET function call to Windows PerfMon.  If the values are not beeing displayed, then the Performance Counter Library values h...

Originally from ticket #653. Saw ur note about root element error and did reset. and it did bring back my Band settings I still have missing: Skin I used All my settings in SDR( Com/mic on etc) ...

Explanation of the ProblemWhen transferring an audio stream between two software process such as PowerSDR and a digital mode application using VAC (virtual audio cables) one consideration is sampli...