Tim Ellison
- Total activity 325
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 177
Activity overview
Latest activity by Tim Ellison-
Tim Ellison created an article,
Configuring a FLEX-6000 for FT8 on a Mac with dogparkSDR, MacLogger and WSJT-X
Content provided by: Keith Mitchell, WA5VTT I have a FLEX-6400, and while I have it running on a Windows NUC, I prefer to operate from my Mac. After digging through countless, mostly out of date p...
-
Tim Ellison created an article,
Interfacing a PGXL to an Icom Exciter using the CI-V Interface
The Power Genius XL (PGXL) amplifier can be interfaced with an Icom exciter using the CI-V interface. The recommended CI-V interface configuration is to use a CI-V hub and level converter, such as ...
-
Tim Ellison created an article,
Hardware ALC for amplifier protection is not recommended with FlexRadio SDRs.
Content provided by: FlexRadio Systems Engineering The intent of an external ALC (automatic level control) interface is to reduce an exciter’s RF drive level to ensure that it does not exceed leve...
-
Tim Ellison created an article,
How to fix a blank SmartLink login screen when running Win10 or Win8
SmartLink requires that Internet Explorer (IE) be enabled for your version of Windows because this is the HTML engine that is used for the web-based login screen. To enable or check to see if IE is...
-
Tim Ellison created an article,
Resolving the "single red blink" Fan Error on Start Up
The FLEX-6000 has the ability to detect a variety of faults that could potentially harm the radio and one of these is detecting if the cooling fan is working properly. When booting up your radio, ...
-
Tim Ellison created an article,
Retrieving the Radio Information from a FLEX-6000
There will be times where knowing the radio information will be required, usually during troubleshooting issues. Retrieving the Radio Status is a very simple process. Please follow the procedure ...
-
Tim Ellison created an article,
ARRL FMT Technique with FLEX-6000 Series Radios
The document, ARRL FMT Technique with FLEX-6000 Series Radios, by Ron Panetta, WB2WGH whhich can be downloaded from the FlexRadio web site describes in great detail how to use a FLEX-6000 software ...
-
Tim Ellison created an article,
How to fix SmartSDR CAT "Trial period has Expired. Program is disabled now" Errors
If you start up SmartSDR CAT and toy receive an error that the "Inner Exception: Trial Period has Expired. Program is disabled now" error (see image below), follow this procedure to correct the iss...
-
Tim Ellison created an article,
SmartSDR Tunes the Slice Constantly or when PTT is pressed
If you are using a FLEX-6700, FLEX-6500 or a FLEX-6300 that using an 8-pin Foster connector as the mic connector, you have a mic connected to it and you are experiencing the active slice receiver t...
-
Tim Ellison created an article,
The Correct Power Up and Power Down Sequence for "M" Model Radios
The M model radios have an additional set of processors that interface the front panel with the radio RF section and these processors need sufficient time to initialize and shut down to ensure the ...