Tim Ellison

Applies to: SmartSDR CAT and SmartSDR DAXLicense: SmartSDR Basic (v4.3)OverviewSmartSDR CAT and SmartSDR DAX now include a Confirm Exit setting that controls whether a confirmation dialog appears w...

Applies to: FLEX-8000 Series and Aurora radiosLicense: SmartSDR Basic (v4.3)Clients: Configured from SmartSDR for Windows onlyOverviewSmartSDR for Windows includes an NTP tab in Radio Setup, where ...

Applies to: FLEX-6000 Series, FLEX-8000 Series, and Aurora radiosLicense: SmartSDR Basic (v4.3)Clients: SmartSDR for Windows, Maestro, and M-ModelsOverviewCW Profiles add a dedicated profile type f...

Applies to: M-Model radios in the FLEX-6000 Series, FLEX-8000 Series, and Aurora families, and any radio connected to a MaestroLicense: SmartSDR Basic (v4.3)Clients: Maestro and M-ModelsOverviewA n...

Applies to: All modelsLicense: SmartSDR Basic (v4.3)Clients: SmartSDR for Windows, Maestro, and M-ModelsOverviewThe PTT Override setting lets you choose which audio source the hardware PTT puts on ...

Applies to: FLEX-8000 Series and Aurora radiosLicense: SmartSDR+ (v4.3)Clients: SmartSDR for Windows, Maestro, and M-ModelsOverviewNoise Floor Range works with Relative Noise Floor Scaling, which l...

Applies to: All models, except where notedLicense: On/off buttons and level sliders: SmartSDR Basic. Advanced parameters: SmartSDR+ (v4.3)Clients: SmartSDR for Windows, Maestro, and M-Models Overvi...

Applies to: FLEX-6000 Series, FLEX-8000 Series, and Aurora radiosLicense: SmartSDR+ (Early Access feature, v4.3)Clients: SmartSDR for Windows, Maestro, and M-ModelsOverviewAuto AGC-T sets the AGC T...

Applies to: FLEX-8000 Series and Aurora radiosLicense: SmartSDR+ (Early Access feature, v4.3)Clients: SmartSDR for Windows, Maestro, and M-Models OverviewAutoDX (ADX) decodes received CW signals to...

OverviewThis article provides step-by-step instructions for installing and configuring Ham Radio Deluxe with a FLEX-6000 series radio using SmartSDR v4.2.18 and DAX v2.This configuration enables:CA...