Tim Ellison
- Total activity 385
- Last activity
- Member since
- Following 0 users
- Followed by 14 users
- Votes 0
- Subscriptions 216
Articles
Recent activity by Tim Ellison-
Setting the Win7 1394 Bus Driver to the Legacy Version
For the Firewire-based FLEX-5000 and FLEX-3000 connected to Win7 PCs, you may experience intermittent connection behavior due to software defects in the native Win7 1394 bus driver that interfaces ...
-
XP SP3 Firewire Performance Hotfix
There is a bug in the Windows XP Service Pack 3 update that decreases the data throughput (speed) of the Firewire interface from 400 Mb/s (S400) to 100 Mb/s (S100) that can significantly affect the...
-
Win7 Core Parking Optimization for Intel i7 CPUs
CPU Parking is a feature of multi-core/SMP systems that disables cores when the system load is low. According to public documentation on the feature, unpark time is near instantaneous, but there *i...
-
Win7 Hotfixes for AMD FX Processors
There have been reported several incidents of AMD FX processors not working properly with the new 4.0 Firewire driver. We have learned that there are several Win7 bugs and subsequent hotfixes relat...
-
Optimal "High Performance" Power Options for SmartSDR
The Windows operating system has a feature that allows it to shut down PC hardware after some time of perceived inactivity. If your radio is running and Windows shuts down either the Ethernet inte...
-
Building Mic Cables for Connecting a Balanced Dynamic Mic to a FLEX-5000
There are two primary methods for connecting a balanced dynamic microphone (one that does not require phantom power) to the FLEX-5000 by using either the front 8-Pin Foster connector or the 1/4" TR...
-
RFI with Heil CC-1-Y Microphone cable and the FLEX-5000
If you are using the Heil CC-1-Y mic cable from Heil Sound with your FLEX-5000, you may experience RFI issues due to the way some of these cables are wired. The FLEX-5000's microphone input is ess...
-
How to Mitigate FlexControl Latency
The FlexControl uses a USB connection that emulates a serial or com port on your PC which allows it to communicate with PowerSDR or SmartSDR. The com port in Windows emulates a 16550 UART (Univers...
-
Setting up the FLEX-5000 to work with SATPC32
The following PDF download describes in detail how to configure a FLEX-5000 + RX2 + VU software defined radio to operate satellites using SATPC32 for Doppler correction tuning. Setting up the FLEX-...
-
How to Create a Kernel Memory Dump File
If in the rare event, your Windows PC is crashing, generating the dreaded Blue Screen of Death (BSoD), Windows will try and create a "dump file" that contains diagnostic information about what caus...