Tim Ellison

Content by: FlexRadio Service DepartmentItems needed: A table, workbench, or flat surface that provides a safe and secure environment for accessing all sides of Power Genius XL. Screwdriver with Ph...

Content provided by: Geoff W8GNM Depending on how you have your FLEX-6000 connected to external speakers or other audio processing hardware, there is always the possibility of creating "ground loop...

Content by: Michael Walker VA3MW If you are looking at this, you may be in a situation where the internet connection provided by your ISP is something called Carrier Grade NAT (CGNAT). StarLink is ...

Content provided by: Dave, WO2X • Download and install the latest version of DDUtil from http://k5fr.com/DDUtilV3wiki/index.php?title=Download You will need to set up a pair of virtual serial port...

This "how to" describes the procedure to best configure the hardware or Firewire driver Sampling Rate , Buffer Size in Sample and Operation Mode in the FLEX Firewire Control Panel. Introduction Aud...

If you are new to the FLEX-6000 and SmartSDR, here are some documents that you may wish to review and have handy.       First, I would start here after you have your radio connected to your compute...

Content provided by Michael, VA3MW  The SonOff 4 Channel Pro relay which is available on Amazon World Wide and at a reasonable price is a good option for booting a FLEX-6000 remotely. There seems t...

Content provided by:  Keith Mitchell, WA5VTT I have a FLEX-6400, and while I have it running on a Windows NUC, I prefer to operate from my Mac. After digging through countless, mostly out of date p...

Content provided by: FlexRadio EngineeringThe intent of an external hardware ALC (automatic level control) interface is to reduce an exciter’s RF drive level to ensure that it does not exceed level...

SmartLink requires that Internet Explorer (IE) be enabled for your version of Windows because this is the HTML engine that is used for the web-based login screen. To enable or check to see if IE is...