Tim Ellison

Content provided by Tom, W4TMW The information provided below can be used to Interface an Elecraft XV144 transverter to a FLEX-6300 Hardware Interface IF connections The FLEX-6300 can only be conne...

Content provided by: Bobby OwsinskiThe following excerpt from "The Mixing Engineer's Handbook" by engineer Bobby Owsinski discusses how EQ can affect different frequencies in an audio mix. A Tips a...

Article by: EA4GLI / 8P9EH - Salvador I recently purchased a FLEX-6300 and was at first disappointed with the performance of the waterfall display and panadapter. I had to lower the speed and FPS ...

The SmartSDR LAN Remote feature uses the Windows default Playback (speaker / headphones) and Recording (microphone) audio devices.   In general, on Win7 and Win 8.x PCs, when plugging a headset in...

The ability to turn on or off your radio while operating remotely is a necessary convenience when using SmartLink. The FLEX-6000 Signature Series SDRs have a connector, REM ON (REMote ON),  that wi...

As more features are added to the FLEX-8000 and FLEX-6000 Signature Series SDRs, depending on the feature, there may be increases in the amount of bandwidth utilized between the radio and the clien...

The FHM-1 is a communications grade microphone and will never sound as good as a quality studio microphone, but compared to many hand mikes you can achieve fairly good fidelity by using the tips be...

If you have two or more FLEX-6000s on the same IP network (subnet) they will all show up in the radio chooser.   If you want to force a specific PC to connect to a specific radio and this includes...

Experience has shown that Windows does not always correctly identify or enumerate existing serial (COM) ports on a PC, particularly when some of those ports are virtual. In these cases, Windows may...

DownEast Microwave (DEMI) has new pre-assembled 4 and 2 meter power amplifiers / LNA exclusively for the FLEX-6700 and FLEX-6500. Based on the popular DEMI VHF transverter design, they have develo...