Tim Ellison

FlexRadio products are exported under the following US Customs International Harmonized Code: 8525 60 2000 for Amateur (Hobby) radios manufactured in the USA. The FLEX-6000 has been neither tested ...

Content by: FlexRadio Service DepartmentItems needed: A table, workbench, or flat surface that provides a safe and secure environment for accessing all sides of Power Genius XL. Screwdriver with Ph...

Content provided by: Geoff W8GNM Depending on how you have your FLEX-6000 connected to external speakers or other audio processing hardware, there is always the possibility of creating "ground loop...

Content by: Michael Walker VA3MW If you are looking at this, you may be in a situation where the internet connection provided by your ISP is something called Carrier Grade NAT (CGNAT). StarLink is ...

Content provided by: Dave, WO2X • Download and install the latest version of DDUtil from http://k5fr.com/DDUtilV3wiki/index.php?title=Download You will need to set up a pair of virtual serial port...

This "how to" describes the procedure to best configure the hardware or Firewire driver Sampling Rate , Buffer Size in Sample and Operation Mode in the FLEX Firewire Control Panel. Introduction Aud...

If you are new to the FLEX-6000 and SmartSDR, here are some documents that you may wish to review and have handy.       First, I would start here after you have your radio connected to your compute...

Content provided by Michael, VA3MW  The SonOff 4 Channel Pro relay which is available on Amazon World Wide and at a reasonable price is a good option for booting a FLEX-6000 remotely. There seems t...

Content provided by:  Keith Mitchell, WA5VTT I have a FLEX-6400, and while I have it running on a Windows NUC, I prefer to operate from my Mac. After digging through countless, mostly out of date p...

Content provided by: FlexRadio EngineeringThe intent of an external hardware ALC (automatic level control) interface is to reduce an exciter’s RF drive level to ensure that it does not exceed level...