Tim Ellison
- Total activity 385
- Last activity
- Member since
- Following 0 users
- Followed by 13 users
- Votes 0
- Subscriptions 216
Articles
Recent activity by Tim Ellison-
Identifying the Wires Connected to a RJ-45 Connector Terminated Ethernet Cable
A common cable that can be used for creating a connection from the FLEX-3000, FLEX-1500 or Maestro microphone connector to external audio hardware or to a custom microphone connector is the ubiquit...
-
ADC Overload with Direct Sampling SDRs - Myths Debunked
By Steve Hicks, N5AC - VP of Engineering I've received some feedback that there is some confusion circulating on other ham radio reflectors regarding how analog to digital converters (ADCs) work i...
-
Windows Reports FlexRadio Drivers as Digitally Unsigned
Microsoft requires the use of kernel-mode drivers, such as the ones used for the FlexControl FlexRadio Systems digitally signs all of our kernel-mode drivers and executables with a valid security c...
-
How to Manually Reinstall a PowerSDR FlexControl
Content provided by: Tim, W4TME It may become necessary to manually reinstall the FlexControl driver after an operating system upgrade. The procedure below describes how to perform this action. ...
-
How to Manually Reinstall the SmartSDR FlexControl Driver
It may become necessary to reinstall the FlexControl driver after an operating system upgrade manually. The procedure below describes how to perform this action. Shut down SmartSDR Shut down yo...
-
Troubleshooting FlexVSP Not Running Errors
Content provided by: Tim, W4TME If you receive the error below, there are Three possible reasons for the error; either the FlexVSP driver is not installed, the driver install is corrupted or the vi...
-
How to Repair the FlexVSP Virtual Serial Port Driver
Fixing SmartSDR CAT Virtual COM Port Issues (FlexVSP Repair)In some cases — most often after a Windows update — the virtual serial port driver used by SmartSDR CAT may stop working. When this happ...
-
How to do a Complete uninstall of SmartSDR for Windows from your PC
Content provided by: FlexRadio Tech Support Windows 10 updates have a history of corrupting kernel mode drivers. Before any Windows 10 Feature Updates, you may choose to completely remove SmartSDR...
-
Connecting MacLogger DX to a FLEX-6000
Content provided by Andreas, N6NU You can connect a FLEX-6000 to MacLogger DX using the TCP/IP interface available in the MacLogger Preferences setup. Use the image below as a setup example. Jus...
-
Interfacing a FLEX-6000 to an Ameritron AL-80B Amplifier using an ARB-704
Content provided by: Larry, W8LLL Connecting an Ameritron AL-80B Amplifier to any FLEX-6000 using an ARB-704 is a very straightforward proposition. 1.) Connect an RCA mono cable from TX1, TX2 or ...