Tim Ellison

We recently debugged a problem where SmartSDR-Win was reporting in the Settings->Radio Setup->General tab that the graphics adapter was not providing partial or maximum graphics acceleration when t...

NOTE: This article only applies to the FLEX-6000 GPSDO since it is a GPS-only system.  The FLEX-8000s utilize the GNSS constellation of satellites, of which GPS is a subset.An external GPS antenna ...

 There are several things you can do to optimize the throughput performance of your Ethernet adapter to ensure maximum performance.  These settings and recommendations are not required to operate y...

Setting up network devices on a LAN is often seen as complicated and time-consuming. But not with the FLEX Signature Series SDRs and SmartSDR™. In most cases, simply plugging your FLEX-6000 or FLEX...

Due to the 48 kHz sampling rate of the FLEX-1500 and the default 9 kHz DDS IF, the main receiver passband can be offset to the right side of the Panadapter.  To move the main receiver passband clos...

When you start the PowerSDR software without a radio attached, it will default to "demo" mode which will allow you to operate the radio by using pre-recorded digitized RF files.  In this mode you a...

ESC is a unique diversity reception feature that is only available on a FLEX-5000 with the 2nd Receiver installed (RX2).  Since the two receivers are essentially identical in performance and design...

Deferred Procedure Calls (DPCs) are a core function of all modern operating systems, including Windows. They control how the system prioritizes and schedules hardware-related tasks. When Windows ne...

To get the latest Intel graphics card drivers, go to the Intel Drivers Download page.

To get the latest AMD (ATI) Catalyst graphics card drivers, go to the AMD Drivers Download page.